Product introduction

4006 H14 Angle aluminum Angle aluminum is an aluminum profile with two perpendicular intersecting edges, which is L-shaped and has sides ranging from ten millimeters to one or two hundred millimeters in length and thicknesses ranging from one millimeter to several tens of millimeters.Angular/ Angle  aluminum can be divided into equal angle aluminum and unequal angle aluminum. Equal angle aluminum is an aluminum profile with two edges of equal length, such as both 20mm, 30mm, or 100mm.
Unequal angle aluminum, as the name suggests, refers to an aluminum profile with two unequal edges, such as one edge being 20mm and the other edge being 30mm, or one edge being 50mm and the other edge being 60mm, and so on.
Angular/ Angle  aluminum is mainly used for edge sealing of ceiling edges. This type of corner aluminum has a relatively thin thickness, which may be around one millimeter. It is also useful for mechanical equipment, such as connectors, which are a bit thicker, usually two to three millimeters or thicker. The application of angle aluminum is still very extensive, and due to its customizable size and thickness, it is deeply loved by customers.

4006 H14 aluminum alloy has a large thermal expansion coefficient, high high temperature strength, and good high temperature corrosion resistance. For machining forged pistons. It is a building material, a forging material for mechanical parts, and a welding material; 4006 aluminum-silicon alloy 1. High wear resistance. Aluminum-silicon alloy has high wear resistance. With the increase of silicon content, the hardness and strength of aluminum-silicon alloy will increase accordingly. 2. Small coefficient of thermal expansion. Any material will expand at high temperature, which limits the application range of most materials. The aluminum-silicon alloy has a small thermal expansion coefficient and can work in a high-temperature environment. 3. Easy to cast. Among the cast aluminum alloys, 4-series aluminum-silicon alloys account for more than 90%, which shows the superior casting performance of aluminum-silicon alloys.

4006 aluminum chemical composition:
aluminum Al (minimum value): balance
silicon Si: 0.8~1.2
iron Fe: 0.50~0.8
copper Cu: ≤0.05
manganese Mn: ≤0.03
magnesium Mg: ≤0.01
chromium Cr: ≤0.20
zinc Zn: ≤0.05